This text explains methods to disassemble an Xbox One controller if it wishes maintenance, stay an eye fixed out for attainable issues and what particular gear you’ll want. Xbox One controllers are extensively thought to be some of the perfect controllers in video video games, however they nonetheless fail every now and then.
You’ll use a Torx bit in a screwdriver or with a socket wrench, or use a different Torx screwdriver, but it surely should be a T-8 safety Torx.
You’ll inform the adaptation between a typical Torx and a safety Torx by means of the small hollow discovered within the tip of a safety Torx. With out this small hollow, a normal T-8 Torx is not going to have compatibility the Xbox One controller screws.
The right way to disassemble the controller for the Xbox One?
For the pry device, you’ll be able to use anything else skinny sufficient to slot in the distance between the controller field and the tip caps. If conceivable, attempt to use a plastic device to steer clear of destructive your controller case.
Right here’s methods to disassemble the Xbox One controller:
- From the similar deal with, take away the second one screw.
- Repeat the similar process at the different deal with, take away the final two screws and the controller will fall aside.
- You presently have get admission to to the noisy motors, triggers, and a few further screws that you’ll be able to depart on my own except you want to exchange explicit elements at the circuit board. To get admission to many of the different elements, take away the meeting from the entrance housing and switch it over.
- You might blank the buttons, analog sticks, D-pad ring, and D-pad from this vantage level, amongst different issues.
- When completed, merely perform the former directions in opposite to reassemble the controller. Put the controller meeting again into the entrance case, substitute the again case, substitute and tighten all of the screws, then substitute the deal with covers and the battery quilt.
Appearing Xbox One Controller Upkeep
Whenever you’ve effectively disassembled your Xbox One controller, you’ll be able to try maintenance. Some issues can also be solved by means of merely cleansing the elements, whilst others require changing the elements.
In some instances, complex abilities akin to soldering are required to take away and substitute elements. For your enjoy, a few of these maintenance are perfect left to the pros.
Different maintenance are a lot more uncomplicated, akin to repairing or changing the d-pad ring. In case your D-pad isn’t responding correctly, do this fast repair:
- Use a pry device or tweezers to softly loosen the spring metal D-pad ring.
- Gently raise your hands at the d-pad ring in order that they practice extra force and reassemble. If that doesn’t resolve your downside, you could desire a new D-pad ring.
In case your Xbox One controller isn’t operating correctly and also you’ve already up to date the firmware and carried out fundamental troubleshooting like checking the batteries, the next move is typically to disassemble the controller.
Listed here are some fixes that require disassembling your Xbox One controller, together with recommendations on what to do after opening the controller:
D-Pad Malfunction: Gently raise the spring meeting tabs to push them down with extra power. Exchange if vital.
Drifting thumbsticks: Blank or substitute thumbstick assemblies as wanted.